Dots

Gas pressure dial thermometers / Marine version

Type 6312 / 6372 / 8312 / 8372 / 1312 / 1372

  • Suitable for outdoor use - closed system (IP65)
  • Completely stainless steel - high quality industrial design
  • Without electrical auxiliary energy
  • Vibration resistant due to high-viscosity silicone filling
  • Suitable for outdoor use - closed system (IP65)
  • Without electrical auxiliary energy
  • Independent of ambient temperature influences

Configure product

Immersion tube output
Nominal size
Display range
Immersion tube length
Immersion tube diameter
Process connection
Description

SIKA Diesel engine dial thermometers are the optimum solution for local temperature measurement of liquids and gases on large diesel engines, e.g. for ship propulsion or in the diesel power generator sector. Depending on the display range, they are suitable for measuring exhaust gas, cooling water, lubricating oil or charge air temperatures. They have a long service life and do not require external power supply.

Dial thermometers of types 6312 to 1372 are local thermometers with cramped-on ring case. Casing and immersion tube are made of stainless steel. All devices comply with EN 13190 and meet class 1.

The devices are available in nominal sizes 63, 80 and 100 mm. The cramped casings are permanently sealed (IP65) and are filled with silicone oil as standard to protect against vibrations.

The common display ranges are 0...100 °C, 0...120 °C, 0...160 °C, 0...200 °C and 50...650 °C. Diesel engine dial thermometers are equipped with smooth immersion tube and movable compression fitting with G½ or G¾ male thread. The standard immersion tube diameter is 10 mm (NG 63) and 12 mm (NG 80 and 100). For NG 80 and 100, 13 mm is optionally available at no extra charge. The immersion tube in sheathed sensor design is optimised for heavy-duty use. On request, we can supply matching solid protection tubes for the thermometers.

Data sheet
Operating manual
Certificates

Request a quote

Request your personal offer for the product you have configured here. If you have any further questions, please do not hesitate to contact us. You will find your personal contact person here.